With framing subcontractors coming in as scheduled, I all of a sudden realized that the floor that they would be framing over had some very serious issues.
Pounding on my cell phone to find someone... Anyone to help me on literally zero notice, I realized the only person I had that could do it... Was me.
So I dusted off the flooring toolbox, started pulling out the old flooring tools and began ripping up floorboards with my trusty Wonderbar.
Not having done this kind of work in a few years, one of the boards I ripped up broke loose and smashed me square in the jaw.
Dazed and bloodied... And luckily not having to call the emergency crew... I realized something...
When you're first learning how to flip a house, there's lots of different ways to do it.
Especially when it comes to the rehab, there are a number of different paths to take:
Some like to do all the rehab work themselves.
Some don't want to do any of the rehab work themselves.
And some pick the middle path, doing some work and then having others do the rest.
Which way is best?
How to Flip A House - Do It Yourself?
Personally, I don't mind doing some of the rehab work...just as long as I don't have to do all of it.
Unless I feel the overwhelming need to pound a sledgehammer through a few walls in the demo... I'd much rather pay someone else to do it.
Personally, I'd rather spend my time looking for the next deal.
I used to be a flooring guy for years, so if I have to do some of the work on a rehab, I will. And if my experience this past week tells me anything, I think its best to stick to overseeing the rehab work instead of doing the rehab work.
However, when you're learning the basics of how to flip a house, there's no doubt that getting your hands dirty on your first house flip is a great way of really getting to know the business.
Doing at least some of the rehab work yourself to start off isn't a bad idea... But then getting others to do it for you afterward is a great way to scale things... As well as limit potential trips to the Emergency Room.
The Pros and Cons of Hiring a GC to Do Your Flips
In an ideal world, hiring a general contractor (or "GC") to do all your rehab work is the best possible way to go when you're house flipping.
But that's only if you can make the numbers work.
It's certainly nice to have one single point of contact to do all the dirty work for your house flips and rehabs while you're out looking for the next deal or rounding up potential buyers.
This way is far easier on you (and your chin), especially if you're doing it part time or have other real estate deals to tend to.
On the flip side, in many areas of the country it's extremely difficult to get a contractor to do the work for you and still stick to your 70% Rule in hopes of getting the ARV and profit margin to make the deal work.
The issue is that the really good general contractors out there tend to use the same subcontractors and don't bid out each job they do. They have "their guys" who do the subcontracting and they're oftentimes reluctant to try to negotiate with them.
On top of that, remember that a GC adds on 10-20% over what his subcontractors charge him. There's nothing wrong with that because everyone needs to make a profit here.
And believe me, on many jobs, your GC really earns that wage!
A good tip here is if you are dead set on using a specific contractor, you might be able to negotiate a lower management percent or even none at all for a percentage of the profits on the deal. General contractors also can be good sources of potential funding as well.
If you are just learning how to flip a house...everything is negotiable in house flipping!
Should I Do The Rehab Myself?
To answer this question, it's going to depend on a lot of different factors, but the biggest factor of all is you.
For me, it was a logical step to do the rehab on my first few house flips. As I said before, I was in the building trades full time and was used to being on job sites. I love construction and to me, turning a run-down shack into a beautiful place to live is one of the coolest things around.
So I went out and got my state contractor's license, ready to GC my first house flip all on my own.
As I look back on it, despite the challenges, it was great experience. Primarily because I could see firsthand how the whole operation runs. This on the job experience has really helped me in my house flipping career - so much so that when I hired the job out in the future, I knew exactly how to set the rules and how to follow the whole house flipping process.
There's nothing like firsthand experience to teach you that.
In House Flipping...Know Thyself
Do you absolutely need to do it this way?
I don't think so. But think of general contracting your first house flip as a bit of "on the job training". It's not necessary - but it's surely an experience you'll refer back to many times in your house flipping and real estate investing career.
If you have a full time job and are rehabbing one house at a time, then you may very well have the time, but this largely depends on the kind of job you have as well.
If you have a fair amount of flexibility with your job hours, then perhaps it may work.
If you're tied to a desk all day and an hour commute away from the geographic area you do your flip in, then perhaps not.
However, only you can answer that.
Do understand this though; in order to effectively manage any real estate investing rehab, you will have to be available to manage the sub-contractors by phone, early in the mornings or in the evenings. And if you have other things on your plate, like a job, a wife, kids... This gets tiresome.
There will be times when you'll need to go on site and if you are on a business trip a thousand miles away at the time, it might be tough to pull this off.
For me, my flooring business allowed me the flexibility to stop in on the job site and check on things whenever I needed so I was fortunate enough to have the flexibility.
You on the other hand, may not.
Ideally, if you have enough money saved up to quit your day job and become a full time Real Estate Investor then this will be much easier for you to manage. Plus at that point, it IS your job!
So if you're not sure if being the general contractor is right for you, then you may want to try it to see if you like it.
But if you'd rather play it a bit safer, then there is another choice that may be right for you.
Behind Door Number 3: The Project Manager
Short of hiring a full blown general contractor, you could use a project manager instead. We've found this to be a very effective way to rehab house flips, especially where hiring a GC is cost prohibitive.
For example, you could approach a smaller, hands-on type of licensed carpenter who has experience working with other subcontractors. You could then negotiate a fee based on his involvement in the project.
I've found carpenters and other subs very receptive to this arrangement. On top of the money they make doing the other work on the property, he's getting paid an override on how well he manages others.
Like I said before, everything is negotiable in real estate investing and house flipping, so be creative here. And remember it's about "win-win".
For example, you could do any number of these financial arrangements:
Flat Fee: Simple enough. Pay a flat fee to oversee the job. No real creativity here.
Partnership: Work out a partnership or an equity stake in the property. This is a very creative way to handle things. I wouldn't suggest this strategy on your first flip, but its one to consider.
Percentage: Pay a percentage of the overall job that may be smaller than a typical general contractors cut. If he's good, this could really save you.
Flat Fee and Performance Bonus: Pay the project manager a project management fee of around $2,000 and then assign bonuses for meeting timelines and budgets. The bonuses really keep the project manager motivated because he has a skin in the game. You pay some money upfront, but even more when they hit performance metrics.
Whatever you do though, do your best to establish a fee that works for the both of you. The fee you pay is largely dependent on your location and the going rates that project managers are typically paid.
You can get this kind of information from your real estate investment mentors, from other real estate investors in the area, or at your local REIA meetings.
Where to Find Project Managers
We've found that finding someone young, hungry and motivated is the best profile for success. It may differ for you, but these are the kind of guys (it's usually guys here ladies) who will put in the extra hours and get things moving in the right direction. Young, ambitious and smart is always a good profile to look for.
There may be some ideal project manager candidates in our backyard at technical colleges. These newly graduated students are typically hungry and have a good background that could be ideal for your project. In some cases, if you find a good one and your budget allows it, put them on your payroll and keep them working for you full time.
More often than not, freshly minted students for what they may lack in "real world experience" may more than make up for it with all the background knowledge from school in addition to the computer and technical knowledge for running budgets and keeping things humming smoothly.
Of course, before you go and hire a full time person to manage your flips, make sure you're in the position to afford it as well as have enough projects going on to keep him or her busy on a regular basis.
So whether you do the rehab on your own, hire a general contractor or get a project manager, you can do well and make money any of these three ways.
Author: Mike LaCava
Mike's Website: http://www.houseflippingschool.com
Comments:
Post Your Comment: